Skip to main content

Book by the hour

Storage & Industrial Space by the Day or Month, for Crews and Makers

The people who build, ship and make things need square footage in bursts. A retailer takes delivery of a season’s stock over six weeks and has to put it somewhere. A contractor needs a secure bay near a job site for the length of the job. An online brand outgrows a spare room in October and is back to normal by February. A maker group needs benches and a floor that tolerates mess on Saturday mornings. None of that fits an industrial lease of five years, and none of it fits a consumer storage unit with a door too narrow for a pallet.

What those jobs need is a defined amount of secure, reachable space for a defined period, with the loading arrangements written down. Taken month to month it is a line item you can stop. Signed as a lease it is a commitment on the balance sheet. Akkontra opens the bays, docks and yards that stand half empty most of the week, so a crew, a maker collective or a small brand can share a building rather than each signing for one, and the owner earns from floor that was standing idle. The square footage is the easy part. Access hours, dock height and how a truck reaches the door are what decide whether a space works at all.

  • Across 8 US markets
Storage & Industrial space on Akkontra

What's included

What counts as storage and industrial space

  • Self storage unit

    A locked unit from locker size up to about a double garage, inside a managed facility with gate hours and cameras. Cheap and simple, but the aisle width and the overhead door set a hard limit on what will go in.

  • Warehouse bay

    A few hundred to several thousand square feet of racked or open warehouse with pallet access and usually shared dock time. The normal answer for inventory that moves on a pallet jack.

  • Loading dock and cross docking time

    Dock access sold by the slot for receiving, breaking down and forwarding freight. Dock height, a working leveler and whether a 53 foot trailer can turn into the yard matter far more than the floor behind it.

  • Light industrial and flex space

    A warehouse shell with a small office and an overhead door, for assembly, light manufacturing, service businesses and trades. The office share is what separates flex space from plain storage.

  • Workshop and fabrication space

    A floor with heavier power, extraction or ventilation, benches and tolerance for noise and dust, for fabrication, woodwork, metalwork and finishing.

  • Cold and climate controlled storage

    Refrigerated, frozen or humidity managed space for food, pharmaceuticals, flowers, wine, documents and anything that warps. It costs considerably more than ambient space, and some facilities meter the power separately.

  • Container and yard space

    Fenced outdoor space for containers, trailers, materials and plant. Surface matters: gravel will hold a container, it will not reliably hold a loaded forklift.

  • Secure equipment and tool storage

    A small alarmed space, often caged off inside a larger building, for tools and equipment of real value between jobs, close enough to the work that the trip is worth making.

  • Document and archive storage

    Shelved, dry space with controlled access for records that must be retained and occasionally retrieved. Ask how much notice a retrieval needs and whether staff pull the boxes or you do.

By market

Storage & Industrial by city

Each market has its own page with neighborhoods, prices and local notes.

Prices

What storage and industrial space costs

Akkontra publishes typical hourly bands for its hourly space types, and industrial space is not one of them, so these rows describe what sets the price instead of quoting a figure that would be a guess. Treat any number you see elsewhere as indicative. The listing shows the full daily or monthly price before you book.

Indicative hourly ranges for Storage & Industrial space, city by city.
CityTypical range
Self storage unitPriced by unit size and floor; ground level and drive up units cost more than those upstairs
Warehouse bayPriced per square foot per month, with dock access and racking charged separately
Loading dock or cross docking slotPriced per slot, by dock height, leveler and how long the trailer stays
Light industrial or flex spacePriced per square foot, by the share of office and whether utilities are metered to you
Workshop or fabrication spacePriced by bench or bay, driven by power supply, ventilation and tolerance for noise
Cold or climate controlled storagePriced well above ambient space, by temperature band and power draw
Container or yard spacePriced per container or parking position, by surface type and gate hours
Document or archive storagePriced per shelf or pallet position, plus any retrieval the host handles for you

Guide

How to choose storage and industrial space

A warehouse listing can be accurate in every number it quotes and still be the wrong space, because the numbers people quote are rarely the ones that bind. Work through it in this order.

Capacity math: cubic feet, pallet positions and the aisle you forgot

Storage is a volume problem sold by the square foot. A standard GMA pallet is 48 by 40 inches, so a pallet footprint is about 13 square feet. Once you add the aisle you need to reach it, real usable density lands nearer 20 to 25 square feet per position at ground level. Count the positions you need, add the aisle, then add the staging area by the door where goods sit while they are being counted.

Clear height is what changes the answer. A building with 24 feet of clear height holds far more per square foot than a unit of 12 feet at the same rate, provided you have the racking and the equipment to reach it. Ask for clear height under the lowest obstruction rather than at the roof peak.

Access is the specification that decides everything else

Establish what the loading arrangement really is: a dock at trailer height with a leveler, a dock at grade, an overhead door you back a van into, or a passenger door and a flight of stairs. Then ask whether a 53 foot trailer can enter and turn in the yard, because plenty of space is served only by box trucks. Measure the smallest opening anywhere on the route, including an interior door frame and a freight elevator car.

Then hours. A facility with gate hours of seven to six is a different business from one open 24 hours a day, and the difference surfaces the first time a delivery runs late. Confirm who holds keys or codes, whether equipment may stay overnight, and whether anybody on site will receive a delivery when you are not there.

Compliance, insurance and what you are not allowed to store

Almost every facility has a prohibited list, and it is longer than people expect: flammables and compressed gas, unrefrigerated perishables, batteries above a certain size, tires in quantity, and anything needing a permit the host does not hold. If your goods are food, cosmetics, pharmaceuticals or regulated in any other way, confirm the facility’s own licensing before a single pallet moves.

Insurance is normally yours to arrange. Most hosts want proof of cover for the goods and liability cover for anyone you send on site, and building managements often want a certificate naming them as additional insured. Sprinkler clearances, maximum stack heights and how close you may store to a sprinkler head are rules the host has to enforce whether or not the listing mentions them.

Monthly, daily and seasonal: matching the term to the need

Industrial space is mostly a monthly product and that is usually the right unit, because moving pallets is expensive enough that a shorter term rarely saves money once you count labor at both ends. Day rates earn their place for a dock slot, a short staging job or a single container drop.

The real decision is whether to size for the peak or for the average. A bay big enough for your busiest six weeks means paying for empty floor the rest of the year. Taking the average and adding a second bay for the season usually costs less, provided you can find one in the same submarket. Tell the host your demand is seasonal, because many will quote a better rate for a short term in their own quiet months. And if the space is a workshop you will be in every week, ask who else uses the building: a shared yard, or a bay next to other trades, is how crews find work and lend each other a hand.

Pitfalls that cost real money

The expensive mistakes are logistical rather than financial: taking space a trailer cannot reach, finding the freight elevator out of service on a Saturday, renting a drive up unit with a door seven feet high for equipment that stands seven and a half, and signing for a bay with no power where the charger has to go.

Two more are administrative. Check who is liable for the floor, because a pallet jack on an unsealed slab or a forklift on gravel can create damage you own. And put the condition and the date you move out in writing: hosts can report damage within 48 hours of checkout, so photograph the space before you load in and again after you clear it.

FAQ

Questions about Storage & Industrial

  • Can I rent warehouse space month to month?

    That is the normal term in this category, and it is what makes the space usable for seasonal inventory and project work. Ask the host for the notice period before you book, because an arrangement that needs 30 days of notice behaves very differently from one you can end in a week.

  • How do I know whether my freight can get in?

    Ask four things: the dock height and whether there is a leveler, the clear width and height of the smallest opening on the route, whether a 53 foot trailer can enter and turn, and the delivery hours for the gate or building. A listing can show a tidy bay that is only reachable by box truck.

  • Is there a minimum size or a minimum term?

    Both are the host’s to set and both are stated on the listing. Self storage goes down to locker size; warehouse bays usually start in the low hundreds of square feet. If you need less than the smallest bay, a cage or a few pallet positions inside a bigger facility is often cheaper than a unit of your own.

  • What am I not allowed to store?

    Expect flammables, compressed gas, unrefrigerated perishables and anything requiring a permit the facility does not hold to be prohibited, and expect the list to go further than that. Regulated goods such as food, cosmetics and pharmaceuticals need a facility licensed for them, so confirm it before anything arrives.

  • Do I need my own insurance?

    Usually, yes. Hosts commonly ask for proof of cover on your goods plus liability cover for your people, and building managements often want a certificate naming them as additional insured. Akkontra does not provide cover for goods in storage.

  • Can I get access 24 hours a day?

    Some spaces offer it and many do not. It is listed per space and it is one of the biggest real differences between two bays at a similar rate, so filter for it rather than asking after you have booked.

  • Can I cancel a storage booking?

    Each listing carries its own policy, and most allow free cancellation up to 24 hours before the start. For a monthly arrangement the notice period the host sets matters more than the cancellation window, so confirm that figure in messages first.

  • Can a crew or a maker group use the same bay every week?

    Yes, and it is worth agreeing as a standing arrangement rather than one booking at a time. Ask the host who may be added to the access list, whether staff will receive deliveries on your behalf, how codes are issued, and where tools sit between sessions. Noise, dust and the hours you may work are the building’s rules, so get them in writing before the first session. Guests are ID verified on Akkontra, but that on its own does not give a courier gate access.

Booking happens in the app.

Browse here, book there. Free to download on iOS and Android.

Get the app
  • App Store, coming soon
  • Google Play, coming soon

Coming soon to iPhone and Android.